skip to main text

Using Caller ID Service to Reject Calls

If you subscribe to the Caller ID service, the printer detects the sender's Caller ID. If the sender's ID matches the condition specified in this setting, the printer rejects the phone call or fax reception from the sender.

Note

  • This setting may not be supported depending on the country or region of purchase.

    Contact your telephone company to confirm whether it provides this service.

Specify the setting following the procedure below.

  1. Make sure that printer is turned on.

  2. Press the Setup button.

    The Setup menu screen is displayed.

  3. Select Fax settings, then press the OK button.

  4. Select Security control, then press the OK button.

  5. Select Caller rejection, then press the OK button.

  6. Select Subscribed, then press the OK button.

    You can now perform settings for Caller rejection.

  7. Select whether to reject a phone call or fax reception from an anonymous number, then press the OK button.

  8. Select whether to reject a phone call or fax reception out of the subscribed service area, then press the OK button.

  9. Select whether to reject a phone call or fax reception from the specified numbers, then press the OK button.

    If you select Reject, you can register the fax/telephone number to reject.

    When Register rejected no.? is displayed on the LCD, select Yes, then register the fax/telephone number to reject.

    For details on how to register the rejected number, see Registering the Rejected Number.

    Note

    • Even if you select Reject, the printer rings once.

      (The printer may not ring depending on the country or region of purchase.)